{bbname}
设为首页收藏本站

中国膜结构网

 找回密码
 立即注册

QQ登录

只需一步,快速开始

查看: 12090|回复: 12

膜结构软件-----easy10.1 9.1

[复制链接]
  • TA的每日心情
    开心
    2019-10-23 08:57
  • 签到天数: 984 天

    连续签到: 2 天

    [LV.10]以坛为家III

    发表于 2013-5-15 13:46 | 显示全部楼层 |阅读模式


    Easy - Software for the integrated planning and calculation of lightweight surface structures

    Due to the engineering system Easy you'll find the optimal software solution for planning, design and calculation of lightweight surface structures.

    Easy is the market leader in the domain of lightweight surface structures planning and design.

    The sketch of free shapes, the static analysis and cutting pattern calculation for textile membranes and ETFE foils are supported in the Easy system.

    The simultaneous calculation of membrane or ETFE foil with stiff primary structure elements generally made-of steel ensure an economic and efficient material usage.

    The calculation of pneumatic structures like airhalls or foil cushions can be done with Easy very user-friendly: The possible allowance of different types of physical laws affords the accurate evaluation of the required material usage, which hence becomes optimal.

    Formfinding

    Opposite to the design of conventional structures a formfinding procedure is needed with respect to textile membrane surfaces because of the direct relationship between form and force distribution.

    The computational Formfinding requires an estimated flow of forces or stresses as an input value for the Formfinding procedure. The evaluation of the Easy Formfinding results is guaranteed by the software. Tools for the visualisation of force and stress distribution, contour-lines, slope lines for drainage, etc. are available.

    Easy allows also a Mixed Formfinding: stiff-elements are combined with the formfinding procedure in order to optimize the position of those elements in a balanced structure.

    Statics

    To check the behavior of lightweight structures under applied load it is necessary to perform static structural analyses on them.

    Due to the large deflections which this class of structure is inherently subject to, geometrically non-linear analysis software must be used.

    Additionally, given the large amount of data required to model all lightweight structure models, the graphical representation of the deformation, force and stress results must be able to be easily controlled to highlight the relevant data.

    The presentation of the results is performed by a Report Generator.

    Cutting Pattern Generation

    Cutting pattern generation is the process of creating planar cloth geometries from compound-curved minimal surfaces.

    This procedure is conceptually analogous to the problem of creating maps of the surface of the earth. Clearly, whatever technique is used, it is necessary to introduce distortions in order to achieve the desired result. However, it is common for more distortion than necessary to be applied, and for the distortion to be badly localized. Due to the enormous variety of patterning situations, strategies which, provide the highest quality patterns, require sophisticated monitoring of distortions.

    Geometrical Non-linear Beam Analysis
    The Easy.Beam module extends Easy.Stat through the provision of geometrically non-linear structural analysis frame elements.

    Easy.Beam is a holistic approach for the static analysis of hybrid truss structures including membranes. We notice that in this field the projects can be described only by a big number of elements and points.

    Easy.Beam uses algorithms developed especially for these problems (Hyper Sparse Algorithms) which minimize the storage and accelerate the speed of the computer: usual PC's are sufficient for large projects.

    Flexibility Elliposoids help to estimate the behaviour of these structures.

    Calculation of Pneumatic Structures

    The Formfinding procedure and the Statical Analysis of Pneumatic Structures can be performed with Easy.Form and Easy.Stat only as a first approximation because of the fact, that the external loads are conservative loads.

    Conservative loads do not change their size and direction during the loading procedure. The internal pressure in Pneumatic Structures is a value depending on the normal vector of the pneumatic system, therefore the use of non-changing conservative loads for the internal pressure can only be an approximation.

    本帖子中包含更多资源

    您需要 登录 才可以下载或查看,没有帐号?立即注册

    x
    http://www.mjgw.org/
    回复

    使用道具 举报

  • TA的每日心情
    开心
    2019-10-23 08:57
  • 签到天数: 984 天

    连续签到: 2 天

    [LV.10]以坛为家III

     楼主| 发表于 2015-5-14 18:17 | 显示全部楼层
    软件本身就带视频教学。仔细找找!
    回复 支持 0 反对 1

    使用道具 举报

  • TA的每日心情
    开心
    2019-10-23 08:57
  • 签到天数: 984 天

    连续签到: 2 天

    [LV.10]以坛为家III

     楼主| 发表于 2013-5-15 13:51 | 显示全部楼层
    [



    本帖子中包含更多资源

    您需要 登录 才可以下载或查看,没有帐号?立即注册

    x
    回复 支持 反对

    使用道具 举报

  • TA的每日心情
    开心
    2016-8-1 10:24
  • 签到天数: 1 天

    连续签到: 1 天

    [LV.1]初来乍到

    发表于 2013-5-17 11:40 | 显示全部楼层
    根据图片全是EASY所为?是Forten吧
    回复 支持 反对

    使用道具 举报

  • TA的每日心情
    开心
    2017-9-9 11:21
  • 签到天数: 3 天

    连续签到: 1 天

    [LV.2]偶尔看看I

    发表于 2014-6-6 19:09 | 显示全部楼层
    确实漂亮、、、
    回复 支持 反对

    使用道具 举报

    该用户从未签到

    发表于 2014-7-23 14:16 | 显示全部楼层
    这个软件好像也很不错,只不过找不到下载的地方,也没有破解
    回复 支持 反对

    使用道具 举报

    该用户从未签到

    发表于 2014-7-30 15:29 | 显示全部楼层
    是否有破解版???好东西
    回复 支持 反对

    使用道具 举报

    该用户从未签到

    发表于 2015-3-14 11:41 | 显示全部楼层
    我也想要....
    回复 支持 反对

    使用道具 举报

  • TA的每日心情
    开心
    2019-10-23 08:57
  • 签到天数: 984 天

    连续签到: 2 天

    [LV.10]以坛为家III

     楼主| 发表于 2015-3-15 08:06 | 显示全部楼层
    现在基本什么软件都有破解的,好软件肯定是收费的,学习用你可以找找!
    回复 支持 反对

    使用道具 举报

    该用户从未签到

    发表于 2015-4-29 08:58 | 显示全部楼层
    求教程求教程求教程求教程求教程求教程求教程求教程求教程求教程
    回复 支持 反对

    使用道具 举报

    您需要登录后才可以回帖 登录 | 立即注册

    本版积分规则


    中国空间膜结构行业

    QQ|申请友链|Archiver|手机版|小黑屋|中国膜结构论坛

    GMT+8, 2019-10-23 14:09 , Processed in 0.345010 second(s), 33 queries .

    Powered by Discuz! X3

    © 2001-2013 Comsenz Inc.

    快速回复 返回顶部 返回列表